Pressure tank repair & replacement
A waterlogged tank, failed bladder, or incorrect air charge makes the pump short-cycle. We check the tank and recommend recharge, repair, or replacement.
ASC Plumbing · Pahrump, NV
Many Pahrump homes depend on a private well. When the pump, pressure tank, or pressure switch stops working right, the whole property can lose water. ASC Plumbing diagnoses and repairs well water systems for Pahrump homes and businesses.
On a private well, your water pressure comes from the well pump and the pressure tank working together. The pump fills the tank, the pressure switch tells the pump when to start and stop, and the tank holds water under pressure so the pump doesn't have to run every time a faucet opens. When one of those parts fails, the symptoms can look like a plumbing problem somewhere else in the house.
If you have no water at all, check whether the well pump breaker has tripped. You can reset it once. If it trips again, leave it off and call, because repeated resets can damage the pump motor.
A waterlogged tank, failed bladder, or incorrect air charge makes the pump short-cycle. We check the tank and recommend recharge, repair, or replacement.
We check the pressure switch, its settings and contacts, the gauge, and the related controls that tell the pump when to run.
When the pump won't run, runs nonstop, or delivers weak flow, we narrow down whether the pump, controls, or plumbing is the cause and explain the scope before work is approved.
A leak in the line between the wellhead and the house can keep the pump running. We find and repair damaged supply lines.
When did it start? Is it the whole property or one fixture? What does the pump sound like when water runs?
We read the gauge, watch a full pump cycle, and check the tank's air charge and the pressure switch.
We work out whether the problem is the pump, the tank, the controls, or a leak downstream.
After the approved repair, we watch the system run through normal cycles before we leave.
A healthy pressure tank lets the pump run for a while, fill the tank, and then rest. When the tank loses its air cushion, it becomes waterlogged and the pump starts and stops every few seconds. That wears out the pump motor and the pressure switch far faster than normal, so short cycling is worth fixing early.
If the pump runs when nothing in the house is using water, water is going somewhere. A running toilet, a dripping irrigation line, or a buried supply-line leak can all keep a well pump working. When the cause isn't obvious, leak detection can find where the water is going. For leaks in the buried line from the well, see water line repair.
Pahrump groundwater is typically very hard. Mineral scale can build up in pressure switches, valves, fixtures, and water heaters over time. If scale keeps showing up, a water softener can protect the rest of the plumbing.
ASC Plumbing works on well systems for Pahrump homes and for businesses that rely on a private well. We look at the pump, tank, controls, and plumbing at each property before recommending a fix.
Service is focused on Pahrump and its communities. Visit the Pahrump service-area page to see the neighborhoods we cover.
For pressure problems that aren't caused by the well equipment.
Learn about water pressure service →Find out where water is going when the pump runs with nothing turned on.
Find a hidden water leak →Protect fixtures and water heaters from Pahrump's hard water.
Learn about water softeners →For a property with no water or an active leak that can't wait.
Get emergency plumbing help →Not sure which service fits the symptom? Explore the common plumbing problems or request service.
Rapid on-and-off cycling usually means the pressure tank has lost its air charge or its bladder has failed, so it can't hold water under pressure. A faulty pressure switch or a leak can cause it too. Short cycling wears out the pump, so it's worth checking soon.
Common signs are a pump that clicks on every few seconds, pressure that drops quickly when a faucet opens, and a tank that sounds or feels full of water all the way to the top. A plumber can check the air charge and tell you whether the tank can be recharged or needs replacing.
It can be. A running toilet, an irrigation leak, or a leak in the line between the well and the house can all keep the pump working. A failing check valve or pressure switch can cause it too. We can narrow down which one it is.
Check whether the well pump breaker has tripped and reset it once. If it trips again or the water doesn't return, leave the breaker off and call ASC Plumbing at (775) 382-9084.
Yes. ASC Plumbing provides well pump and pressure tank service for Pahrump homes and businesses. The scope depends on the equipment and the property.
Call ASC Plumbing for well pump, pressure tank, and pressure switch service at your Pahrump home or business.